Topcon G63 LPS-900 til veghøvel

3D GPS+ og 3D-millimeter GPS+ maskinstyring virker veldig bra, så lenge du har GPS satellittsignaler. Men hva skjer på trange steder eller i tunneler, og GPS-signalet mangler?  For disse tilfellene er Topcon sitt LPS-900 (Local Positioning System) ideelt.

Rather than GPS signals, Topcon’s LPS-900 utilizes a high-accuracy, fast auto-tracking Total Station to maintain machine position information via machine mounted prism. As it tracks the machine/prism, the Total Station maintains exact machine position / grade information per an internally loaded digital site plan. Grade adjustments are then transmitted to the machine 20 times per second via radio from the Total Station. It’s simple, reliable, and the perfect alternative when GPS reception is limited. Compatible with Topcon’s machine mounted GPS grade control components, it’s a quick and easy change to swap LPS for GPS and keep productivity to a maximum.

Based on our popular 900/9000 robotic total station platform, the LPS-900 offers high accuracy position control over your entire site, to within a few millimeters. Topcon’s new robotic total stations utilize the patented XTrak technology to track machines at speeds up to 35 MPH. Machine and blade position is updated 20 times per second, fast enough to meet the tightest jobsite specs. This speed and accuracy makes difficult and complex sites easy to grade.

Switching existing GPS+ systems to LPS-900 is simple. Put up the total station on a control point, place a 360° prism on the vibration pole and a radio in the MC-R3 and you’re ready to go to work. The robotic total station locates the 360° prism and sends the X, Y, Z position of the cutting edge to the machine via radio link. The operator can now work as before, but with very high accuracy. Obstructions to the sky no longer hinder your work or slow you down. Whatever the conditions are at the job, Topcon LPS-900 can help you get it done fast and accurately.

Features

• Topcon Xtrak prism tracking technology
• 20Hz update rate
• Long range 2.4Ghz interference free radio communications
• GX-60 control box runs LPS, GPS and all 3D controls
• Visual graphic on display for acquiring lost beam

Benefits

• Insures all your jobsites have 3D control 24/7
• High accuracy for tight tolerance projects
• Simple & fast conversion between LPS and GPS
• Same robot used with Pocket 3D as layout/grade checking tool

LPS-900 – an EASY upgrade to Topcon’s G63 Motor Grader and Z63 Bulldozer 3D GPS+ systems
Topcon’s LPS-900 grade control system is a seamless upgrade to Topcon’s 3D GPS+ based G63 Motor Grader and Z63 Bulldozer grade control systems. G63 / D63 3D-GPS+ systems feature:

GX-60 – the World’s easiest-to-use operator’s interface

Topcon’s G63 and Z63 3D grade control systems feature the most advanced Operator interface available, Topcon’s GX-60 touch sensitive control box. Light and compact with a full-color LCD touch sensitive screen, Topcon’s GX-60 is a fully functioning Windows® computer that provides the operator with real-time grade information and control. Constructed of a strong cast housing and sealed internals, the GX-60 will be a refreshingly simple alternative to other operator interfaces.

GX-60 control box features include:
512 Mb Internal Compact Flash Drive
650 MHz Intel CPU
Windows XP Operating System
USB, Ethernet, RS-485, CAN, and RS-232 ports
Sealed Housing with Gortex Vent
Audio Speaker
Internal Backup Battery
Ambient Light Sensor for Sharp Contrast on the Display
Bluetooth Wireless Technology

MC-R3 – Machine Control Receiver 3

Topcon’s MC-R3 houses the LPS-900 controller and radio board in a built-to-last housing.Providing either solid brackets for permanent mounting or magnetic mounting for portability. A built-in MINTER panel provides status lights and function keys for easy performance verification and system checks. The MC-R3 can be easily upgraded to add GPS capabilities providing the utmost in system upgradability.